Insulation in Plainfield, IN
Crawl space encapsulation and vapor barrier work in Plainfield runs into a specific problem: homes built during the 1990s-2010s Hendricks County boom often have open, unsealed crawl spaces that pull humid summer air straight into the house. That humidity, combined with winter freeze-thaw cycles, rots rim joists and makes floors cold in ways homeowners blame on their furnace. Call us at (866) 751-4428 and we’ll tell you exactly what’s happening under your house before we touch anything.
Why Plainfield Homes Are Different
Plainfield sits directly east of Indianapolis International Airport, and the flight approach paths run right over the residential neighborhoods on the town’s eastern and northern edges. Homeowners in those areas deal with a constant low-frequency rumble that most insulation packages never address. Dense-pack and blown-in products with real acoustic mass make a difference here that a standard fiberglass batt simply can’t. That’s a local condition we plan around on nearly every attic job we do in this zip code.
The housing stock creates its own set of problems. Most homes in Plainfield are 1990s-2010s suburban tract builds, put up fast during the growth surge along US-40 and Ronald Reagan Parkway. Contractors from that era regularly laid R-19 batts flat in attics that should carry R-49 by current IECC Zone 5A standards. Rim joists were often left completely open. We find this pattern so consistently in subdivisions like Summerfield and the Villas at Lion Heart that we now lead with an attic and rim-joist audit on almost every job. Older ranch and split-level homes along the National Road corridor predate modern air and vapor barrier standards entirely, which means air sealing has to happen before insulation does.
Plainfield also sits in IECC Climate Zone 5A: humid summers push attic temperatures past 140°F, and winter nights regularly drop below 10°F. That swing stresses thermal and moisture performance at the same time. High summer dew points mean vapor management matters as much as R-value. A poorly sealed attic in this climate doesn’t just waste energy, it grows mold.
Our Main Plainfield Services
Two services dominate the calls we get from Plainfield homeowners. The first is attic insulation, because so many early-2000s builds here were under-insulated from day one. The second is air sealing, because an attic that leaks air is an attic that can’t hold temperature no matter how much insulation you pile on.
Attic Insulation in Plainfield
Plainfield attics routinely measure R-19 where R-49 is the current minimum for Zone 5A. That gap is why upstairs rooms in Summerfield and along the US-40 corridor bake in July and freeze in January. We pull the old batts, air-seal the floor, and blow to code with materials matched to the house. The full breakdown of options, pricing, and what we see in specific Plainfield neighborhoods is on the dedicated Attic Insulation in Plainfield page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Crawl Space Encapsulation & Vapor Barrier in Plainfield
Plainfield’s clay-heavy soil holds water against foundation walls longer than the sandier ground you’ll find east of the airport. That means crawl spaces here stay damp well into dry spells, which is exactly the condition that rots rim joists and feeds mold. Encapsulation seals the dirt floor and foundation walls out of the equation, and a Crawl Space Encapsulation & Vapor Barrier job done correctly also stops the stack effect from pulling crawl space air up through the living space. Homeowners in early-2000s subdivisions are usually surprised how much of their summer humidity problem starts under the house, not in the attic.
Crawl Space Vapor Barrier
Signs you need it
Damp dirt or standing water after rain, a musty smell in the first floor, or condensation on ductwork and floor joists.
What it costs in Plainfield
Vapor barrier installation in Plainfield typically ranges from $1,200 to $3,000 depending on square footage and access.
How we do it
We remove standing water, level the floor, and lay a reinforced poly liner up the walls and around piers, sealing every seam.
Crawl Space Encapsulation
Signs you need it
Rusted duct straps, peeling insulation, warped floorboards, or humidity readings above 60% in the crawl space.
What it costs in Plainfield
Full encapsulation in Plainfield generally runs between $5,000 and $12,000, with larger or low-access spaces at the higher end.
How we do it
We seal vents, install the liner on floor and walls, condition the space with a dehumidifier if needed, and insulate the rim joists.
Crawl Space Insulation
Signs you need it
Cold floors in winter, high heating bills, or exposed fiberglass batts that have sagged or fallen between joists.
What it costs in Plainfield
Rim joist and crawl space insulation in Plainfield typically runs $1,000 to $2,500 depending on the space’s size and condition.
How we do it
We pull degraded material, air-seal the rim joist with spray foam, and install closed-cell or rigid foam board to code.
What Crawl Space Encapsulation & Vapor Barrier Costs in Plainfield
| Item | Typical range in Plainfield |
|---|---|
| Vapor barrier (basic liner) | $1,200 - $3,000 |
| Full encapsulation | $5,000 - $12,000 |
| Rim joist insulation | $1,000 - $2,500 |
| Dehumidifier + drain setup | $1,500 - $3,500 |
Is encapsulation worth it in a Plainfield house built in the early 2000s?
Yes, often more than in older homes. Early-2000s tract builds here typically have open vents and zero vapor management, which means the crawl space has been pulling humid air for two decades. Sealing it fixes the humidity source rather than treating symptoms.
Do I need a dehumidifier after encapsulation?
Sometimes. Plainfield’s summer dew points stay high enough that even a sealed crawl space can trend humid without one. We recommend a dehumidifier when readings stay above 55% after sealing. Call (866) 751-4428 for a straight answer on your specific house.
Spray Foam Insulation in Plainfield
Plainfield’s airport-adjacent neighborhoods get a double hit: summer attic heat above 140°F and constant approach-path noise that conventional batts do almost nothing to stop. Closed-cell Spray Foam Insulation handles both. Because it’s an air barrier and an insulation layer in one, it also solves the rim-joist leakage we find in nearly every 2000s-era build along Ronald Reagan Parkway.
Open-Cell Spray Foam
Signs you need it
Uneven room temperatures, noisy flight-path overhead, or high bills in a home where the attic already has loose insulation but no air seal.
What it costs in Plainfield
Open-cell spray foam in Plainfield attics typically costs $1.50 to $3.00 per board foot installed.
How we do it
We prep the attic, apply foam to the roofline, and verify coverage with a depth gauge before it sets.
Closed-Cell Spray Foam
Signs you need it
Moisture on attic sheathing, ice dams in winter, or a crawl space that stays damp even after grading and gutter fixes.
What it costs in Plainfield
Closed-cell spray foam in Plainfield runs $2.50 to $5.00 per board foot, with rim joists at the lower end of that range by square foot.
How we do it
We apply foam in lifts to control heat, trim excess, and confirm thickness with a probe against the manufacturer’s spec.
What Spray Foam Insulation Costs in Plainfield
| Item | Typical range in Plainfield |
|---|---|
| Open-cell attic (roofline) | $1.50 - $3.00 / board ft |
| Closed-cell attic (roofline) | $2.50 - $5.00 / board ft |
| Rim joist sealing | $1,000 - $2,500 typical |
| Garage ceiling | $2.00 - $4.00 / board ft |
Is spray foam safe after installation?
Yes, once cured. We follow manufacturer re-entry times exactly, and our techs are background-checked and uniformed, so you know who’s in your house. Open-cell and closed-cell both off-gas during application, not after cure.
Will spray foam really quiet airplane noise?
It reduces it significantly. Closed-cell foam adds mass and seals air gaps that let sound through, which matters for homes under the Indianapolis International approach paths. Call (866) 751-4428 for an honest assessment of what foam can and can’t do for your specific house.
Blown-In Insulation in Plainfield
The single most common defect we find in Plainfield attics is R-19 batts lying flat where R-49 belongs. That’s a builder-grade install from the 1990s-2010s wave, and it’s why so many second floors here can’t hold temperature in either July or January. Blown-In Insulation fixes it fast by filling every gap a batt can’t reach, and it’s the most cost-effective upgrade for a tract-built home on a slab or over a vented crawl space.
Blown-In Cellulose
Signs you need it
Attic insulation measuring under 15 inches deep, high summer cooling bills, or rooms that swing 10 degrees between day and night.
What it costs in Plainfield
Blown-in cellulose in Plainfield attics typically runs $1.50 to $2.50 per square foot installed to R-49.
How we do it
We air-seal the attic floor first, then blow GreenFiber or similar cellulose to the target depth and verify with a depth ruler.
Blown-In Fiberglass
Signs you need it
You want higher R-value per inch than cellulose, or you’re topping up existing fiberglass batts that have settled.
What it costs in Plainfield
Blown-in fiberglass in Plainfield typically costs $1.00 to $2.00 per square foot for an R-49 attic.
How we do it
We run a hose to the attic, blow to a marked depth, and level the coverage so no low spots remain over exterior walls.
What Blown-In Insulation Costs in Plainfield
| Item | Typical range in Plainfield |
|---|---|
| Blown-in cellulose attic (R-49) | $1.50 - $2.50 / sq ft |
| Blown-in fiberglass attic (R-49) | $1.00 - $2.00 / sq ft |
| Dense-pack wall (per wall cavity) | $2.00 - $4.00 / sq ft |
| Top-up over existing batts | $0.75 - $1.50 / sq ft |
How deep should blown-in insulation be in a Plainfield attic?
About 18-20 inches of cellulose or 16-18 inches of fiberglass to reach R-49 for Zone 5A. Most builder-grade attics we test in Plainfield measure half that. We mark depth lines before we blow so you can verify the final number yourself.
Can you add blown-in over old batts?
Usually, yes, if the batts are dry and no animal contamination is present. We check for air leaks first, because blowing over an unsealed attic floor wastes a third of the R-value. Call (866) 751-4428 and we’ll tell you what’s safe in your attic.
Radiant Barrier Installation in Plainfield
Plainfield attics hit 140°F in summer, and that heat radiates straight down through the ceiling into living space. A Radiant Barrier Installation reflects that heat back up before it ever touches the insulation. In a single-story ranch along US-40 with a big south-facing roof, the difference shows up as cooler bedrooms and a shorter AC runtime, and that’s before we talk about the insulation itself.
Attic Radiant Barrier
Signs you need it
Upstairs rooms that stay hot after sunset, an attic that’s unbearable to stand in during the day, or an AC that runs constantly in August.
What it costs in Plainfield
Radiant barrier installation in Plainfield attics typically runs $0.75 to $1.50 per square foot depending on roof geometry.
How we do it
We staple foil to the underside of the roof decking, leaving a vent gap, and trim around vents and braces so airflow isn’t blocked.
Radiant Barrier Roof Deck
Signs you need it
New construction or a roof replacement where you want the barrier applied before decking goes on, or an attic with exposed rafters you plan to finish.
What it costs in Plainfield
Roof-deck radiant barrier in Plainfield adds $0.50 to $1.00 per square foot to a roofing or insulation project.
How we do it
We roll the foil over the decking before shingles go down, or fasten it from below in an open attic, depending on timing.
What Radiant Barrier Installation Costs in Plainfield
| Item | Typical range in Plainfield |
|---|---|
| Attic radiant barrier (foil) | $0.75 - $1.50 / sq ft |
| Roof deck application | $0.50 - $1.00 / sq ft added |
| Radiant barrier + ventilation fixes | $1,200 - $2,800 total |
Does a radiant barrier make sense in Plainfield winters?
It does little for winter heat loss, which is still handled by insulation and air sealing. But Plainfield’s hot, humid summers justify it on their own. We recommend radiant barrier only after air sealing, otherwise you’re treating the symptom above while the leak below keeps costing you money.
Will a radiant barrier damage my roof shingles?
No, when installed correctly with the required air gap. We install to manufacturer spec and check that ridge and soffit ventilation isn’t restricted. Call (866) 751-4428 if you want us to inspect an existing install for you.
Insulation Removal & Replacement in Plainfield
Homes along the US-40 corridor and in Plainfield’s older subdivisions sometimes carry insulation that’s been there since the original build, and it shows. Animal droppings, moisture damage, and decades of dust can render old insulation useless. Insulation Removal & Replacement pulls the compromised material out and starts clean, which is also the only safe way to handle a vermiculite find.
Attic Insulation Removal
Signs you need it
Visible rodent activity, stained or matted insulation, or an attic where previous work left gaps and compressed batts that can’t be topped up.
What it costs in Plainfield
Attic insulation removal in Plainfield typically runs $1.00 to $2.00 per square foot, plus disposal and any contamination handling.
How we do it
We run a HEPA-filtered vacuum to the attic, bag the old material, and remove it through a sealed chute so dust stays out of the house.
Contaminated Insulation Removal
Signs you need it
Smell of urine or droppings in the attic, visible mold on sheathing or batts, or a raccoon or squirrel that nested and left waste behind.
What it costs in Plainfield
Contaminated removal in Plainfield adds $500 to $1,500 over standard removal, depending on the extent of contamination.
How we do it
We remove contaminated material in sealed bags, sanitize the attic deck, and treat any remaining surfaces before new insulation goes in.
What Insulation Removal & Replacement Costs in Plainfield
| Item | Typical range in Plainfield |
|---|---|
| Attic removal (standard) | $1.00 - $2.00 / sq ft |
| Contaminated removal surcharge | $500 - $1,500 |
| Disposal fees | $200 - $600 typical |
| Replacement blown-in (R-49) | $1.50 - $2.50 / sq ft |
Is it cheaper to remove or just cover old attic insulation?
Covering is cheaper initially, but if the old material is wet, contaminated, or compacted, covering just traps the problem. In Plainfield’s humid climate, moisture trapped under new insulation creates mold within a season. Call (866) 751-4428 for a straight read on whether removal is actually necessary in your attic.
What if I have vermiculite insulation?
We stop work and have it tested before touching it. Vermiculite from certain mines can contain asbestos, and we will not disturb it until a lab clears the material. This is a safety line we never cross, no matter the timeline.
Attic Air Sealing in Plainfield
Plainfield’s Zone 5A climate punishes air leaks harder than most places: humid summer air gets pulled into the attic and condenses, while winter stack effect pulls heated air out through every penetration. Most tract homes here were built with zero air sealing at the attic floor, which is why Attic Air Sealing is the first thing we do before adding insulation. An unsealed attic can waste a third of whatever R-value you paid for.
Attic Floor Air Sealing
Signs you need it
High bills despite decent insulation levels, dust streaks on the ceiling, or rooms that smell like the attic in summer.
What it costs in Plainfield
Attic floor air sealing in Plainfield typically runs $1.00 to $2.00 per square foot of attic floor.
How we do it
We move aside existing insulation, seal every top plate, wire penetration, and plumbing chase with foam or caulk, then re-cover.
Can Light & Duct Boot Sealing
Signs you need it
Recessed lights that feel hot, dirty air blowing from ducts, or a ceiling that’s warm to the touch around fixtures.
What it costs in Plainfield
Sealing can lights and duct boots in Plainfield adds $300 to $800 to an air sealing job, depending on fixture count.
How we do it
We install rated covers over non-IC can lights, seal duct boots to the drywall, and foam any gaps around the registers.
What Attic Air Sealing Costs in Plainfield
| Item | Typical range in Plainfield |
|---|---|
| Full attic floor sealing | $1.00 - $2.00 / sq ft |
| Can light & duct boot sealing | $300 - $800 |
| Attic hatch sealing & insulation | $150 - $400 |
| Combined air seal + blown-in | $2.50 - $4.00 / sq ft total |
Should I air seal before or after adding insulation?
Always before. Sealing requires access to the attic floor, which means pulling insulation aside, doing the work, and then blowing on top. Doing it after means moving new material twice for no reason, which costs you more in labor.
How much of a difference does air sealing actually make?
In a typical Plainfield tract home, sealing the attic floor cuts air leakage by 20-40%, which translates directly into lower heating and cooling bills. It also stops humid summer air from condensing in the attic, which protects the roof deck. Call (866) 751-4428 if you want a blower door number for your house.
Wall Insulation in Plainfield
Exterior walls in Plainfield’s older ranches and split-levels were often built with nothing in the cavities, or with R-11 batts that have since settled. That’s why rooms facing west over the airport approaches feel like they’re baking in July while the furnace runs nonstop in January. Wall Insulation changes both, and drill-and-fill methods let us do it without tearing out drywall.
Injection Foam Wall Insulation
Signs you need it
Rooms that won’t hold temperature, noise from outside coming through walls, or outlets that feel cold in winter.
What it costs in Plainfield
Injection foam wall insulation in Plainfield typically runs $3.00 to $6.00 per square foot of wall area, depending on access.
How we do it
We drill small holes through each stud bay from the outside, inject foam to fill the cavity, then patch and match the exterior.
Interior Wall Soundproofing
Signs you need it
Plainfield homes under the airport flight paths, or a bedroom sharing a wall with a noisy living space.
What it costs in Plainfield
Interior wall soundproofing in Plainfield typically costs $2.00 to $5.00 per square foot of wall.
How we do it
We dense-pack cellulose or install fiberglass with sound battens, often on existing walls through small ports, to add mass and break sound transmission.
What Wall Insulation Costs in Plainfield
| Item | Typical range in Plainfield |
|---|---|
| Injection foam (existing walls) | $3.00 - $6.00 / sq ft |
| Drill & fill (cellulose) | $2.00 - $4.00 / sq ft |
| Interior soundproofing | $2.00 - $5.00 / sq ft |
| Exterior wall (new construction) | $1.00 - $2.50 / sq ft |
Can you insulate my walls without removing drywall?
Yes, in most Plainfield homes we insulate existing walls from the exterior by drilling small access ports into each stud bay, then patching to match. The siding or brick gets restored cleanly, and you don’t live through a drywall tear-out inside.
Will wall insulation stop the airplane noise?
It reduces it meaningfully, especially when we dense-pack cavities that were previously empty. Exterior wall mass is the biggest factor in cutting low-frequency noise from the airport. Call (866) 751-4428 for a straight assessment of your wall cavities.
Attic Cleaning & Rodent Proofing in Plainfield
Plainfield’s mature trees and older housing stock along the National Road corridor make attics a regular target for squirrels and raccoons looking for a warm nesting spot. Once animals move in, the droppings and chewed wiring create hazards that insulation alone can’t fix. Attic Cleaning & Rodent Proofing removes the mess, seals the entry points, and makes sure nothing comes back.
Attic Cleanout
Signs you need it
Scratching sounds at night, a trail of animal droppings, or nests made from shredded insulation and leaves.
What it costs in Plainfield
Attic cleanout in Plainfield typically runs $500 to $1,500 depending on attic size and the extent of contamination.
How we do it
We remove contaminated insulation and debris, bag it on site, and vacuum the attic deck clean with HEPA filtration.
Rodent Proofing & Exclusion
Signs you need it
Chewed soffit edges, daylight visible at the roofline, or grease marks where animals squeeze through openings.
What it costs in Plainfield
Rodent proofing and exclusion in Plainfield adds $400 to $1,200 over the cleanout, depending on how many entry points need sealing.
How we do it
We find every opening, seal them with steel mesh and foam where appropriate, and harden the likely re-entry points around the roofline.
What Attic Cleaning & Rodent Proofing Costs in Plainfield
| Item | Typical range in Plainfield |
|---|---|
| Attic cleanout (standard) | $500 - $1,500 |
| Sanitizing & decontamination | $300 - $800 |
| Rodent proofing & exclusion | $400 - $1,200 |
| Full cleanout + proofing + re-insulate | $3,000 - $8,000 |
Do you handle the animals themselves, or just the proofing?
We focus on exclusion and proofing, which means sealing entry points so animals can’t re-enter. For live trapping, we’ll point you to a licensed wildlife removal service working in Plainfield. Once they clear the space, we handle the cleanup and prevent re-entry.
How do I know if the attic just needs cleaning or full insulation replacement?
If the insulation is dry, you may only need a cleanout and air sealing. But droppings, urine, or nesting usually mean replacement. We’ll tell you which applies after one look at the attic. Call (866) 751-4428 to schedule an inspection.
Home Energy Audit in Plainfield
Plainfield’s mix of 1990s-2010s tract construction and older ranches along US-40 means most homes here have hidden energy leaks that no amount of added insulation will fix by itself. A Home Energy Audit finds those leaks with instruments, not guesswork. In a Zone 5A climate with humid summers, testing before insulating saves homeowners from paying twice.
Blower Door Test
Signs you need it
High bills, uneven room temperatures, or a house that feels drafty even when the thermostat reads fine.
What it costs in Plainfield
A blower door test in Plainfield typically runs $200 to $400 as part of a full audit, or $150 to $300 standalone.
How we do it
We mount the blower door in an exterior doorway, depressurize the house, and measure the exact air leakage rate with a manometer.
Thermal Imaging Inspection
Signs you need it
Ice dams in winter, mold on ceilings, or rooms that never match the rest of the house no matter the season.
What it costs in Plainfield
Thermal imaging in Plainfield adds $150 to $350 to an audit, depending on home size and access.
How we do it
We scan walls, ceilings, and attic floors with an infrared camera to map missing insulation and hidden air leaks.
What Home Energy Audit Costs in Plainfield
| Item | Typical range in Plainfield |
|---|---|
| Full home energy audit | $400 - $800 |
| Blower door test (standalone) | $150 - $300 |
| Thermal imaging | $150 - $350 |
| Duct leakage test | $200 - $500 |
What’s actually included in a Plainfield home energy audit?
A blower door test, thermal imaging scan, insulation inspection, and a duct leakage check when applicable. You get a written report with the priority fixes ranked by cost and impact. We don’t sell you the audit and then disappear; the report stands on its own.
Will the audit qualify me for any rebates?
Possibly, depending on your utility provider in the Plainfield area. We’ll help you match the findings to current utility and manufacturer programs. Call (866) 751-4428 and we’ll tell you what applies to your house.
Brands We Service in Plainfield
We install and service insulation from Icynene, Demilec, and Owens Corning, among others. Parts and materials are stocked locally, so most Plainfield jobs don’t wait on shipping. Turnaround is typically same-week once we’ve assessed your attic or crawl space. See our brands for the full list.
Pricing for Insulation in Plainfield, IN
| Service | Typical range in Plainfield |
|---|---|
| Blown-in cellulose attic (R-49) | $1.50 - $2.50 / sq ft |
| Blown-in fiberglass attic (R-49) | $1.00 - $2.00 / sq ft |
| Open-cell spray foam | $1.50 - $3.00 / board ft |
| Closed-cell spray foam | $2.50 - $5.00 / board ft |
| Attic air sealing | $1.00 - $2.00 / sq ft |
| Crawl space vapor barrier | $1,200 - $3,000 |
| Crawl space encapsulation | $5,000 - $12,000 |
| Attic insulation removal | $1.00 - $2.00 / sq ft |
| Radiant barrier | $0.75 - $1.50 / sq ft |
| Wall injection foam | $3.00 - $6.00 / sq ft |
| Home energy audit | $400 - $800 |
| Attic cleanout | $500 - $1,500 |
What pushes prices higher in Plainfield: low-clearance crawl spaces common in older ranches along US-40, animal contamination, and roofs with complex geometry under airport flight paths. We give upfront pricing before work starts, and the Done Right Promise stands behind every job.
Neighborhoods We Serve in Plainfield
We work throughout Plainfield, including the subdivisions that grew up during the early-2000s building boom and the older corridors near the National Road. Most Plainfield homes are within a 30-minute drive of our crews, and emergency inspections for animal or moisture issues are often possible same-day.
- Summerfield
- The Villas at Lion Heart
- Legacy Farms
- Vandalia
- Downtown Plainfield / US-40 corridor
Service Area - Cities Near Plainfield
Walt’s Insulation also serves homeowners in Avon, IN, Brownsburg, IN, Greenwood, IN, and Indianapolis, IN. Scheduling is coordinated from our Indianapolis office, with local crews dispatched throughout Hendricks County and the surrounding metro.
Serving Plainfield, IN - Our Local Coverage Area
We’re based in the Plainfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation in Plainfield
Most Plainfield homes are within a 30-minute drive of our crews, and we answer every call with a live person, 24/7. For moisture or animal issues, we can often schedule a same-day inspection. Regular insulation work is typically same-week.
Most insulation, air sealing, and crawl space encapsulation jobs don’t require a building permit in this area, though some spray foam applications and structural changes may. We’ll tell you exactly what applies to your job before we start, no surprises.
Will you walk me through what my attic actually needs before I commit
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Plainfield Customers Say
"We had the walls of our old house filled with foam through small holes from the outside. Patched and painted the same afternoon. The bedrooms hold heat now and the furnace runs a lot less."
- Linda Baumgartner"Good honest work on the attic. The price was a little higher than one online quote, but Walt is the one who actually showed up and the one whose name is on the truck, and that was worth it to us."
- Helen Tran"Radiant barrier and new insulation in one visit. Walt explained what the foil actually does and what it does not, which nobody else bothered to. Electric bill in July was the lowest it has been in this house."
- Nadia Haddad