Insulation in Sunrise, FL
Crawl space encapsulation and vapor barrier work in Sunrise addresses the city’s defining challenge: homes built in the 1960s through 1980s on the edge of the Everglades water conservation area absorb sustained ground moisture that eastern Broward communities never see. Attic temperatures here routinely pass 150°F in summer, and original insulation in most Sunrise homes has settled far below current Florida Energy Code. Call us at (866) 751-4428 and a live person answers, day or night.
Why Sunrise Homes Are Different
Sunrise sits at the western edge of developed Broward County, directly against the Everglades buffer zone, and that geography drives the work we do here. The city’s single-family stock is overwhelmingly CBS construction from the 1960s through 1980s, with low-slope or hip roofs and original blown-in fiberglass or batt insulation that was never meant to handle decades of South Florida humidity. Overnight dew-point levels run measurably higher than in coastal cities like Fort Lauderdale because there’s no ocean breeze to moderate the interior, so any insulation with compromised vapor control becomes a mold host within a few seasons.
Older streets off Sunrise Boulevard and NW 44th Street are where we most often find original 1970s blown-in insulation compacted to an effective R-8 or less. Homes in those neighborhoods also contend with HOA requirements in the many condominium and townhome communities from the 1970s and 1980s, where shared-wall and shared-attic assemblies mean a retrofit plan has to be approved before work starts. We know how to write those proposals so boards can act on them.
Our Main Sunrise Services
Most homeowners in Sunrise call us for two things: attic insulation that has failed and crawl space moisture that is creeping into living areas. Here is how we handle both.
Attic Insulation in Sunrise
Most Sunrise attics we inspect are running well below the R-30 to R-38 the Florida Energy Code expects today, and in many cases the original 1970s fiberglass has compacted to R-8 or worse. Heat pours into the house, the AC runs constantly, and the attic becomes a moisture trap. We remove what is failing, air-seal the attic floor, and blow in new insulation to current code: the full job, not a top-up. See Attic Insulation in Sunrise for the full breakdown of what this work involves and what it costs here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Crawl Space Encapsulation & Vapor Barrier in Sunrise
Crawl space encapsulation in Sunrise is driven by the city’s position against the Everglades buffer zone, where ground moisture and overnight dew-point levels run higher than in eastern Broward. In homes built from the 1960s through the 1980s, open crawl spaces pull that damp air into floor framing and then into living areas, promoting mold, must, and rot. Encapsulating the crawl space and installing a vapor barrier stops that cycle at the source rather than just treating the symptoms inside the house. This is the work we describe in detail on our Crawl Space Encapsulation & Vapor Barrier page, and it is the single most common call we run in Sunrise.
Crawl Space Vapor Barrier
Signs you need it
You smell must or damp in rooms above a crawl space, floor joists show dark staining or surface mold, or you see standing water after heavy rain.
What it costs in Sunrise
A vapor barrier in a Sunrise crawl space typically runs $1,200-$3,000 depending on square footage and access.
How we do it
We clean and level the ground, lay a reinforced polyethylene liner across the floor, and secure it up the foundation walls with mechanical fasteners and sealed seams.
Crawl Space Encapsulation
Signs you need it
Humidity in the crawl space stays above 60% even in dry spells, insulation hanging from the floor is damp or falling, or you have recurring condensation on ductwork.
What it costs in Sunrise
Full encapsulation in Sunrise generally runs $5,000-$12,000 depending on crawl space size and whether a dehumidifier is included.
How we do it
We seal foundation vents, wrap piers, insulate the perimeter walls, install a vapor barrier across the floor, and set up a dehumidifier sized for the space.
Crawl Space Moisture Control
Signs you need it
Wood floor cupping above the crawl space, high indoor humidity that the AC cannot pull down, or visible efflorescence on block foundation walls.
What it costs in Sunrise
Standalone moisture control work, including drainage and dehumidification, typically runs $1,500-$4,000 in Sunrise.
How we do it
We identify the moisture source, correct drainage where feasible, seal openings, and install a dehumidifier or ventilation strategy that matches the crawl space volume.
What Crawl Space Encapsulation & Vapor Barrier Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Crawl space vapor barrier | $1,200-$3,000 |
| Full crawl space encapsulation | $5,000-$12,000 |
| Moisture control with dehumidifier | $1,500-$4,000 |
| Crawl space cleanout | $800-$2,500 |
Can you encapsulate my crawl space without removing old insulation first?
Yes, if the old insulation is dry and structurally sound; if it is damp or moldy, it has to come out first or the encapsulation traps the problem. Call (866) 751-4428 and we will tell you exactly what your Sunrise crawl space needs.
Is a dehumidifier always required in an encapsulated Sunrise crawl space?
Almost always, because Sunrise’s proximity to the Everglades keeps ground moisture high year-round. A dehumidifier sized for the space keeps humidity below the mold threshold even in summer. Call (866) 751-4428 for a free estimate.
Spray Foam Insulation in Sunrise
Spray foam insulation is the most effective answer for Sunrise attics that hit 150°F and for CBS homes where wall cavities were never insulated at all. Closed-cell foam air-seals and insulates in one pass, shutting down the moisture and heat transfer that define this city’s climate. We cover the full range of this work on our Spray Foam Insulation page, and we install Icynene and Demilec products here because they hold up to South Florida humidity better than most.
Open-Cell Spray Foam
Signs you need it
Attic temperatures are brutal in summer, upstairs rooms never cool, and you want an air-sealing insulation that also lets roof deck leaks show themselves.
What it costs in Sunrise
Open-cell foam in a Sunrise attic typically runs $1.50-$3.00 per board foot installed.
How we do it
We prep the roof deck, mask off the space, and spray the foam to the specified depth, then check for full coverage and proper curing before we leave.
Closed-Cell Spray Foam
Signs you need it
You have a low-slope roof with limited clearance, you need structural rigidity, or you want the highest R-value per inch available.
What it costs in Sunrise
Closed-cell foam in Sunrise runs $2.50-$5.00 per board foot installed.
How we do it
We apply closed-cell foam directly to the roof deck or wall cavity in lifts, checking thickness and density as we go so the finished layer performs as specified.
What Spray Foam Insulation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Open-cell spray foam | $1.50-$3.00 per board foot |
| Closed-cell spray foam | $2.50-$5.00 per board foot |
| Rim joist spray foam | $400-$1,200 |
| Garage ceiling spray foam | $800-$2,500 |
Is closed-cell worth the extra cost in Sunrise?
Usually yes if your roof deck has low clearance or you want the moisture-impermeable performance that matters most near the Everglades; open-cell is often enough for standard pitched attics. Call (866) 751-4428 for a straight answer on your attic.
Will spray foam stop the heat in my Sunrise attic?
Yes, because it air-seals while it insulates, cutting the hot, humid air that enters through the roof deck and around penetrations. Call (866) 751-4428 and we will price your attic accurately.
Blown-In Insulation in Sunrise
Blown-in insulation is the most practical answer for most Sunrise attics, where original 1960s and 1970s fiberglass has settled to R-8 or less and no longer meets the Florida Energy Code’s R-30 to R-38 expectation. We blow Owens Corning fiberglass or GreenFiber cellulose across the attic floor after air-sealing the plane beneath it. The full process is laid out on our Blown-In Insulation page, and in Sunrise this job almost always begins with removing what is already up there.
Blown-In Fiberglass
Signs you need it
Your attic has thin, flattened insulation, upstairs rooms run hot, and your AC bills climb every summer.
What it costs in Sunrise
Blown-in fiberglass in Sunrise typically runs $1,200-$3,500 depending on attic size and depth needed.
How we do it
We air-seal the attic floor, mark depth gauges, and blow fiberglass to code depth across the entire surface, checking coverage evenly as we go.
Blown-In Cellulose
Signs you need it
You want a denser, more heat-resistant material than fiberglass, especially in an attic with irregular joist spacing or lots of odd corners.
What it costs in Sunrise
Blown-in cellulose in Sunrise generally runs $1,500-$4,000 depending on depth and attic layout.
How we do it
We prep the space, air-seal, and blow GreenFiber cellulose to the specified R-value, settling it into corners and around framing.
What Blown-In Insulation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Blown-in fiberglass attic | $1,200-$3,500 |
| Blown-in cellulose attic | $1,500-$4,000 |
| Dense-pack wall insulation | $2,000-$5,000 |
| Blown-in top-up | $600-$1,500 |
Can you just add insulation on top of what is already in my Sunrise attic?
Sometimes, but in most Sunrise homes the existing insulation has absorbed so much moisture from the Everglades-adjacent climate that it needs to come out first. Adding on top of compromised material recreates the problem. Call (866) 751-4428 for an honest assessment.
How much insulation does my Sunrise attic actually need?
Current code in Florida calls for R-30 to R-38 in vented attics, which usually means 10 to 14 inches of blown-in fiberglass or cellulose depending on the material. Call (866) 751-4428 and we will measure yours exactly.
Radiant Barrier Installation in Sunrise
Radiant barrier installation in Sunrise targets the single biggest heat source in your home: a roof deck that bakes all day under the Broward sun and radiates heat into the attic and then your living space. In a city where attic temperatures top 150°F through summer, a radiant barrier can cut that heat transfer measurably. Our Radiant Barrier Installation page explains the materials and methods, and in Sunrise we most often install foil-faced barriers under the roof deck in CBS homes with hip roofs.
Attic Radiant Barrier
Signs you need it
Your attic is unbearable in summer, your AC runs nonstop, and you want to reduce heat gain without adding bulk insulation.
What it costs in Sunrise
An attic radiant barrier in Sunrise typically runs $1,000-$3,000 depending on roof deck area.
How we do it
We staple foil-faced barrier to the underside of the roof rafters, leaving air gaps where needed, and reinforce attachment points so it holds in humidity.
Radiant Barrier Foil
Signs you need it
You already have adequate insulation but still feel heat radiating from the ceiling, or you want a lower-cost first step before full attic work.
What it costs in Sunrise
Foil radiant barrier in Sunrise runs $800-$2,500 for a typical single-story home.
How we do it
We roll out foil across the attic floor or staple it to the roof deck depending on your roof configuration, then check for tears and gaps.
What Radiant Barrier Installation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Attic radiant barrier | $1,000-$3,000 |
| Radiant barrier foil | $800-$2,500 |
| Radiant barrier roof deck | $1,200-$3,500 |
| Radiant barrier with ventilation upgrades | $1,500-$4,000 |
Does a radiant barrier work in a ventilated Sunrise attic?
Yes, a radiant barrier works best in vented attics because it reduces the radiant heat load before it reaches the insulation, which is the main heat source in Sunrise summers. Call (866) 751-4428 to see what your roof deck would need.
Can I install a radiant barrier myself instead of calling you?
You can, but working in a 150°F Sunrise attic is dangerous and getting the attachment right in humidity matters for long-term performance. We recommend trained professionals. Call (866) 751-4428 for a free estimate.
Insulation Removal & Replacement in Sunrise
Insulation removal and replacement in Sunrise usually starts with the reality that original 1970s blown-in fiberglass has compacted to an effective R-8 or less and is visibly discolored from decades of moisture cycling driven by the city’s position near the Everglades. Simply adding insulation on top of that material without addressing the air-sealing failures beneath recreates the same moisture problem within a few seasons. Our Insulation Removal & Replacement page walks through the process, and in Sunrise this is the step most homeowners skip but should not.
Attic Insulation Removal
Signs you need it
The existing insulation is thin, compacted, stained, or has been wet at any point, and your attic never seems to hold temperature.
What it costs in Sunrise
Attic insulation removal in Sunrise typically runs $1,500-$4,000 depending on attic size and access.
How we do it
We vacuum out the old material with commercial equipment, bag and dispose of it, then clean the attic floor so the space is ready for air-sealing and new insulation.
Contaminated Insulation Removal
Signs you need it
You have rodent droppings, mold, or water-damaged insulation, and the attic smells or makes anyone who enters it sneeze.
What it costs in Sunrise
Contaminated insulation removal in Sunrise runs $2,500-$6,000 because it includes sanitizing after removal.
How we do it
We remove the contaminated material under containment, clean and sanitize the attic surfaces, and verify the space is safe before new insulation goes in.
What Insulation Removal & Replacement Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Attic insulation removal | $1,500-$4,000 |
| Contaminated insulation removal | $2,500-$6,000 |
| Vermiculite and old insulation removal | $3,000-$7,000 |
| Full removal and replacement | $3,500-$9,000 |
Can you remove and replace insulation in one day in Sunrise?
Yes, most standard attics in Sunrise can be removed and re-insulated in a single day, though contaminated or oversized jobs may run into a second day. Call (866) 751-4428 to schedule.
How do I know if my old insulation is the problem?
If it is compacted below half its original depth, stained, damp to the touch, or smells, it is failing, and in Sunrise the moisture load makes that failure happen faster. Call (866) 751-4428 for an inspection.
Attic Air Sealing in Sunrise
Attic air sealing in Sunrise matters as much as insulation, because the city’s position against the Everglades buffer zone means humid air moves through the attic floor and into living spaces all year. In older Sunrise homes, gaps around top plates, can lights, and duct boots pull conditioned air out and pull moist outside air in. Our Attic Air Sealing page covers the methods, and here this work almost always precedes any new insulation.
Attic Floor Air Sealing
Signs you need it
Rooms under the attic stay stuffy, dust keeps appearing on surfaces, and your AC runs longer than it should on hot days.
What it costs in Sunrise
Attic floor air sealing in Sunrise typically runs $800-$2,000 depending on attic size and how many penetrations exist.
How we do it
We seal every penetration in the attic floor: wiring holes, plumbing chases, wall-top gaps, and any other opening that lets air move between conditioned and unconditioned space.
Can Light & Duct Boot Sealing
Signs you need it
You feel warm air around recessed lights, see dust trails near ceiling fixtures, or notice cold spots in rooms below the attic.
What it costs in Sunrise
Sealing can lights and duct boots in Sunrise runs $300-$900 for a typical home.
How we do it
We install covers or seal boxes over non-rated can lights, seal duct boots to the drywall, and verify no conditioned air is escaping into the attic.
What Attic Air Sealing Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Attic floor air sealing | $800-$2,000 |
| Top plate and penetration sealing | $600-$1,800 |
| Can light and duct boot sealing | $300-$900 |
| Attic hatch sealing | $150-$500 |
Is attic air sealing worth doing before adding insulation in Sunrise?
Yes, and doing it the other way around is a mistake; new insulation over an unsealed attic floor still lets humid Sunrise air move through the ceiling and into the living area. Call (866) 751-4428 and we will check both.
How much can air sealing save on my Sunrise electric bill?
Most homeowners see 10% to 20% lower cooling costs after a proper air seal and insulation job, because the AC is no longer fighting moist, hot attic air. Call (866) 751-4428 for a specific assessment.
Wall Insulation in Sunrise
Wall insulation in Sunrise usually means retrofitting CBS concrete-block homes from the 1960s through 1980s that were built with no insulation in the block cavities at all. The block and stucco shell absorbs heat all day and releases it into the house at night, and without cavity insulation the AC never catches up. Our Wall Insulation page explains the options, and in Sunrise the most common approach is injection foam through the block walls.
Injection Foam Wall Insulation
Signs you need it
Rooms on the west and south sides stay hot even with the AC running, interior walls feel warm to the touch, and energy bills spike in summer.
What it costs in Sunrise
Injection foam wall insulation in Sunrise typically runs $2,500-$7,000 depending on wall area and the number of stories.
How we do it
We drill small holes through the block or stucco, inject foam into the cavities at controlled pressure, and seal the holes to match the existing finish.
Drill & Fill Wall Insulation
Signs you need it
Your home has framed exterior walls with empty cavities, or you have already done attic work and still feel the house losing cool air overnight.
What it costs in Sunrise
Drill and fill wall insulation in Sunrise runs $2,000-$5,500 for an average single-story home.
How we do it
We drill access holes in the wall surface, blow insulation into each cavity until dense, then patch and finish the holes cleanly.
What Wall Insulation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Injection foam wall insulation | $2,500-$7,000 |
| Drill and fill wall insulation | $2,000-$5,500 |
| Exterior wall insulation | $3,000-$8,000 |
| Interior wall soundproofing | $1,500-$4,000 |
Will wall insulation make a real difference in a Sunrise block home?
Yes, because block walls hold heat for hours after sunset, and filling the cavities stops that release. Most homeowners notice the difference in a week. Call (866) 751-4428 for a free estimate.
Can you insulate my walls without tearing out drywall?
Yes, both injection foam and drill-and-fill are done through small holes that we patch and touch up, leaving no interior demolition. Call (866) 751-4428 to see what your walls need.
Attic Cleaning & Rodent Proofing in Sunrise
Attic cleaning and rodent proofing in Sunrise deals with an unpleasant reality of being near the Everglades: rats and mice move into attics through gaps that most homeowners never see. Once in, they soil insulation, chew wiring, and leave droppings that make the space a health hazard. Our Attic Cleaning & Rodent Proofing page walks through the full process, and in Sunrise this work is often what uncovers the insulation damage that then has to be removed and replaced.
Attic Cleanout
Signs you need it
You hear scratching above the ceiling at night, see droppings in the attic, or notice stained insulation and a foul smell from the ceiling.
What it costs in Sunrise
Attic cleanout in Sunrise typically runs $800-$2,500 depending on attic size and the level of contamination.
How we do it
We remove all soiled insulation and debris, vacuum the attic floor, and prepare the space for sanitizing or new insulation.
Rodent Proofing & Exclusion
Signs you need it
You have had rodents before, or you see gnaw marks, torn insulation, or entry points around vents, soffits, and rooflines.
What it costs in Sunrise
Rodent proofing and exclusion in Sunrise runs $600-$2,000 depending on how many entry points need sealing.
How we do it
We locate and seal every entry point with rodent-proof materials, install exclusion barriers where needed, and verify the attic is not being re-entered.
What Attic Cleaning & Rodent Proofing Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Attic cleanout | $800-$2,500 |
| Attic sanitizing and decontamination | $600-$1,800 |
| Rodent proofing and exclusion | $600-$2,000 |
| Attic restoration | $1,500-$4,500 |
Will rodent proofing keep them out for good in Sunrise?
Yes, if every entry point is sealed properly and the attic is cleaned and sanitized afterward; the rodents move on when they cannot get back in. Call (866) 751-4428 to schedule a look.
Do I need to replace my insulation after rodents were in my Sunrise attic?
Usually yes, because droppings and urine soak into the insulation and make it unsanitary to keep. Call (866) 751-4428 and we will inspect exactly what needs to go.
Home Energy Audit in Sunrise
A home energy audit in Sunrise pinpoints where a house is losing conditioned air and taking in humid outdoor air, which is the root cause of most high electric bills here. Given the city’s Everglades-adjacent moisture load and 150°F attic temperatures, an audit almost always finds problems the homeowner did not know existed. Our Home Energy Audit page describes the testing methods, and in Sunrise we run blower door and thermal imaging tests together to get a complete picture.
Blower Door Test
Signs you need it
Your electric bill is high even after you upgraded the AC, rooms feel drafty, or you suspect the house leaks air but cannot tell where.
What it costs in Sunrise
A blower door test in Sunrise typically runs $300-$600 as part of a full audit, and it usually pays for itself in the findings.
How we do it
We set up a calibrated fan in an exterior door, depressurize the house, and measure how much air leaks in through the building envelope.
Thermal Imaging Inspection
Signs you need it
Rooms heat unevenly, walls feel warm, or you want to see exactly where insulation is missing or has failed without opening anything up.
What it costs in Sunrise
Thermal imaging as part of a Sunrise home energy audit runs $200-$500.
How we do it
We scan walls, ceilings, and floors with an infrared camera, which shows temperature differences that reveal insulation gaps, air leaks, and moisture spots.
What Home Energy Audit Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Blower door test | $300-$600 |
| Thermal imaging inspection | $200-$500 |
| Insulation inspection | $150-$400 |
| Duct leakage test | $200-$500 |
How long does a home energy audit take in Sunrise?
Most audits take two to three hours depending on home size and how many tests we run, and you get a written report with prioritized findings. Call (866) 751-4428 to schedule.
Will a home energy audit tell me if my insulation is the problem?
Yes, the combination of thermal imaging and blower door testing shows exactly where your home is losing air and heat, and exactly what insulation work would fix it. Call (866) 751-4428 for a free estimate on the audit.
Brands We Service in Sunrise
Our Sunrise crews install and service insulation from Owens Corning, GreenFiber, Icynene, and Demilec, and we keep common materials stocked locally for fast turnaround. See our brands for the full list of what we install and service.
Pricing for Insulation in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Crawl space vapor barrier | $1,200-$3,000 |
| Full crawl space encapsulation | $5,000-$12,000 |
| Open-cell spray foam | $1.50-$3.00 per board foot |
| Closed-cell spray foam | $2.50-$5.00 per board foot |
| Blown-in fiberglass attic | $1,200-$3,500 |
| Radiant barrier installation | $1,000-$3,000 |
| Attic insulation removal | $1,500-$4,000 |
| Attic air sealing | $800-$2,000 |
| Injection foam wall insulation | $2,500-$7,000 |
| Attic cleanout | $800-$2,500 |
| Home energy audit | $300-$1,100 |
What pushes the price up in Sunrise is usually access: tight attic hatches, low-slope roofs, and HOA restrictions in condominium and townhome communities from the 1970s and 1980s. We quote upfront and hold to the number, no surprises after the work starts.
Neighborhoods We Serve in Sunrise
We work throughout Sunrise, from the older single-family streets off Sunrise Boulevard and NW 44th Street to the condominium and townhome communities spread across the western half of the city. Our response time for most Sunrise calls is same-day or next-day depending on the work.
- Sunrise Lakes
- Sunrise Golf Village
- East Sunrise
- West Sunrise
- Welleby
Service Area - Cities Near Sunrise
Besides Sunrise, we cover the surrounding Broward and Miami-Dade communities, including Fort Lauderdale, FL, Hollywood, FL, Miami, FL, and Hialeah, FL. Scheduling and dispatch for our Sunrise crews are coordinated from the brand’s Miami office.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation in Sunrise
Most Sunrise calls are answered by a live person immediately, and we schedule same-day or next-day service for insulation work across the city, including evenings and weekends when needed. Call (866) 751-4428 and tell us what you are dealing with.
In many Sunrise condominium and townhome communities from the 1970s and 1980s, yes, especially when work touches shared walls or shared attic assemblies. We can provide the documentation your HOA board needs. Call (866) 751-4428 for help with the process.
We send our own background-checked, uniformed technicians to every Sunrise job, no subcontractors. Walt Brenner owns the business, and the same crew that quotes the job is the one that does the work. Call (866) 751-4428 to schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Sunrise Customers Say
"Walt came out himself, stuck his head in the attic, and told me I had about four inches where I needed fourteen. No sales pitch, just the number and what it would cost to fix it. Crew was here two days later."
- Carl Meadows"We had the walls of our old house filled with foam through small holes from the outside. Patched and painted the same afternoon. The bedrooms hold heat now and the furnace runs a lot less."
- Linda Baumgartner"Good honest work on the attic. The price was a little higher than one online quote, but Walt is the one who actually showed up and the one whose name is on the truck, and that was worth it to us."
- Helen Tran