Insulation in Matthews, NC
Most insulation work in Matthews starts in the crawl space, not the attic. The town’s housing stock is dominated by 1990s and 2000s production homes with vented crawl spaces and fiberglass batts stapled between floor joists. After 15 to 25 years of Mecklenburg County humidity, those batts sag, absorb moisture, and quietly fail. That’s the job we do most here: encapsulation and vapor barrier work that turns a damp, mold-prone crawl space into a dry, conditioned buffer under the house. If you’re not sure where to start, call (866) 751-4428 and we’ll walk you through it.
Why Matthews Homes Are Different
Matthews sits in IECC Climate Zone 3A, which means hot, humid summers with dewpoints in the 70s and winter nights that occasionally drop into the teens. Insulation here is not just about R-value; it’s about moisture control. The soil under a vented crawl space stays damp for months at a time, and that moisture rises into the floor system. Homes built around the I-485 construction era, which shaped so much of Matthews, typically got R-13 walls and R-30 attics, standards that fall well short of today’s energy codes. The vinyl-sided, two-story production homes that fill Matthews subdivisions age in predictable ways: attic insulation settles, crawl space batts fall, and air sealing was barely considered when they were framed. A technician who learns the houses here learns to check the crawl space hatch first, because that’s where the real problems live.
Our Main Matthews Services
Two jobs dominate our schedule in Matthews. The first is crawl space work, full stop. The second is attic insulation, often called in when upstairs rooms will not hold temperature. Here’s what each involves.
Attic Insulation in Matthews
Attics in Matthews run brutally hot from June through September, and under-insulated attics make upstairs bedrooms feel like a different climate than the main floor. We see R-30 fiberglass from the 1990s that has settled to half its labeled depth. We remove or top up as needed and air seal before adding material, because sealing is what actually keeps conditioned air in the house. For the full breakdown on attic work in this area, read our Attic Insulation in Matthews page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Crawl Space Encapsulation & Vapor Barrier in Matthews
Crawl space encapsulation in Matthews is the single highest-return insulation project a homeowner here can make. The standard vented crawl space under a mid-2000s subdivision home is almost a guaranteed problem: humid summer air pulls ground moisture upward, the fiberglass batts absorb it and lose R-value, and eventually they fall from the joists entirely. A proper encapsulation system seals the ground with a vapor barrier, isolates the foundation walls, and turns the crawl space from a mold factory into a dry, conditioned part of the house. This is our most-called service in Matthews, and we build every job around the specific moisture profile of your lot. Learn more about the full approach on our Crawl Space Encapsulation & Vapor Barrier page.
Crawl Space Vapor Barrier
Signs you need it
You smell must or damp when you open the crawl space hatch, or you see condensation on ductwork and floor joists. In Matthews, standing moisture on the ground after a rain is a reliable tell.
What it costs in Matthews
Vapor barrier installation in Matthews typically runs $2.75-$4.50 per square foot depending on access, liner thickness, and whether the crawl space needs cleaning first.
How we do it
We clean and level the ground as needed, then lay a reinforced polyethylene liner across the floor and up the foundation walls, sealing all seams and pier penetrations. We also tape and fasten the liner so it stays put through Matthews’s humid summers.
Crawl Space Encapsulation
Signs you need it
Your floors are cold in winter, your AC runs nonstop in August, or you have visible mold and rot at the rim joist. Houses in Matthews built before 2010 rarely have any encapsulation at all.
What it costs in Matthews
Full crawl space encapsulation in Matthews typically ranges from $5.50 to $12.00 per square foot, with most production-era homes landing between $8,000 and $15,000 all-in.
How we do it
We seal the vents, install a full vapor barrier on the floor and walls, add rigid foam or spray foam to the foundation walls, and condition the space with a dehumidifier or supply air. The goal is a crawl space that stays dry and stable year-round.
What Crawl Space Encapsulation & Vapor Barrier Costs in Matthews
| Item | Typical range in Matthews |
|---|---|
| Vapor barrier only (floor and walls) | $2.75-$4.50 per sq ft |
| Full encapsulation system | $5.50-$12.00 per sq ft |
| Crawl space dehumidifier | $1,800-$4,200 installed |
| Crawl space cleanout and debris removal | $750-$1,900 |
Do I need encapsulation or just a vapor barrier in Matthews?
If your crawl space is vented and you smell damp or have sagging insulation, encapsulation is usually the right fix in Matthews’s climate. A vapor barrier alone will not keep moisture from moving through the vents and walls.
How long does crawl space encapsulation take in Matthews?
Most Matthews encapsulation jobs take one to three days, depending on crawl space size and how much cleaning is needed first. We’ll give you an exact schedule with your quote, and you can call (866) 751-4428 to book a visit.
Spray Foam Insulation in Matthews
Spray foam in Matthews has to handle two extremes: 95-degree August days with high humidity and winter nights in the teens. Closed-cell foam works well here because it is both an air seal and a vapor retarder, and it will not absorb moisture the way fiberglass does. In vented attics we typically recommend closed-cell at the roofline or rim joist in crawl spaces, both common weak points in Matthews’s 1990s and 2000s homes. For a deeper look at the options, see our Spray Foam Insulation page.
Open-Cell Spray Foam
Signs you need it
You want to air seal an attic or wall cavity without adding a vapor retarder, or you need sound control between rooms. Open-cell is a good fit where moisture is controlled and drying potential matters.
What it costs in Matthews
Open-cell spray foam in Matthews costs roughly $1.20-$2.50 per board foot, with attics and walls varying by depth and access.
How we do it
We prep the cavity, mask off areas, and spray the foam to the specified depth. Open-cell expands to fill the space, then we trim any excess and confirm the air seal.
Rim Joist Spray Foam
Signs you need it
Cold floors near exterior walls in winter, or you can feel air movement at the top of the crawl space wall. Rim joists leak air in nearly every Matthews production home.
What it costs in Matthews
Rim joist spray foam in Matthews usually falls between $4 and $8 per linear foot installed, depending on joist depth and accessibility.
How we do it
We remove the old fiberglass, clean the rim joist surface, then spray closed-cell foam from the sill plate up to the subfloor. The result is an air seal that also insulates.
What Spray Foam Insulation Costs in Matthews
| Item | Typical range in Matthews |
|---|---|
| Open-cell spray foam | $1.20-$2.50 per board foot |
| Closed-cell spray foam | $2.00-$4.50 per board foot |
| Rim joist spray foam | $4-$8 per linear foot |
| Spray foam roof deck | $7,500-$16,000 for a typical 1,800-2,600 sq ft attic |
Is spray foam worth it in Matthews?
For crawl spaces and rim joists, yes. Closed-cell foam stops both air and moisture, which is exactly what Matthews’s humid climate demands.
Can you spray foam an existing Matthews home without gutting it?
Attics, rim joists, and crawl space walls can be sprayed without demolition. Wall cavities are trickier, but injection and drill-and-fill methods work. Call (866) 751-4428 and we’ll tell you what’s possible for your house.
Blown-In Insulation in Matthews
Blown-in insulation in Matthews is most often a top-up job: a 1990s or 2000s attic that started at R-30 and has settled to something closer to R-20 or less. In Zone 3A, the current recommendation for attics is R-38 to R-60, so most Matthews homes are running at half of what they should have. Blown-in fiberglass or cellulose is the fastest way to close that gap without tearing anything apart. For options and install details, see our Blown-In Insulation page.
Blown-In Cellulose
Signs you need it
You can see the tops of your attic floor joists, or your upstairs runs five to ten degrees warmer than the main floor all summer.
What it costs in Matthews
Blown-in cellulose in Matthews typically runs $1.15-$2.25 per square foot for an R-38 attic top-up.
How we do it
We air seal the attic floor first, then blow GreenFiber cellulose to the target depth using calibrated hoses. It settles minimally and performs well in Matthews’s humidity when properly installed.
Blown-In Fiberglass
Signs you need it
Your existing attic insulation is compressed, dirty, or full of gaps around can lights and ductwork.
What it costs in Matthews
Blown-in fiberglass in Matthews averages $1.00-$2.10 per square foot for a standard attic, including prep and cleanup.
How we do it
We remove old, failed material when needed, air seal the floor, then blow Owens Corning fiberglass to an even depth. We finish by checking that soffit vents are clear and the attic is stable.
What Blown-In Insulation Costs in Matthews
| Item | Typical range in Matthews |
|---|---|
| Blown-in cellulose attic top-up (R-38) | $1.15-$2.25 per sq ft |
| Blown-in fiberglass attic (R-38 to R-60) | $1.00-$2.10 per sq ft |
| Dense-pack wall insulation | $2.00-$4.00 per sq ft |
| Blown-in top-up over existing batts | $0.80-$1.40 per sq ft |
How much blown-in insulation does a Matthews attic need?
Most Matthews homes need R-38 to R-60, which means 12 to 16 inches of cellulose or 14 to 20 inches of fiberglass. We measure and tell you exactly what you have now versus what code expects.
Can you blow insulation over old fiberglass batts in Matthews?
Yes, if the old batts are dry and reasonably intact. We always air seal first, then blow over the top to reach the target depth. Call (866) 751-4428 if you’d like us to check before you commit.
Radiant Barrier Installation in Matthews
Radiant barrier in Matthews is a roof-level solution for sun-driven heat gain, which is a real problem here from May through September. A staple-up or foil-faced roof deck product reflects radiant heat before it ever enters the attic, which reduces the load on your AC and makes the attic itself less punishing. Homes with dark shingles and south-facing roof planes benefit most. We install radiant barrier alongside attic air sealing where it makes sense. Details are on our Radiant Barrier Installation page.
Attic Radiant Barrier
Signs you need it
Your attic hits 130-plus degrees in summer, or your AC runs constantly even with decent attic insulation. Radiant heat is the load you are fighting.
What it costs in Matthews
Attic radiant barrier in Matthews runs $1.75-$3.50 per square foot installed on the roofline, depending on roof pitch and access.
How we do it
We staple a foil-faced barrier to the underside of the roof rafters, keeping a small air gap between foil and roof deck. We finish by checking that ridge and soffit vents remain open.
Radiant Barrier Roof Deck
Signs you need it
You are replacing your roof and want to cut heat gain at the source, or your attic is too tight to work in easily. Roof deck radiant barrier gets installed when shingles come off.
What it costs in Matthews
Radiant barrier roof deck in Matthews adds roughly $1.50-$3.00 per square foot to a roofing project, plus coordinating between crews.
How we do it
We coordinate with your roofer so the foil-faced decking or foil layer goes down before the shingles. The barrier works continuously across the entire roof plane.
What Radiant Barrier Installation Costs in Matthews
| Item | Typical range in Matthews |
|---|---|
| Attic staple-up radiant barrier | $1.75-$3.50 per sq ft |
| Roof deck radiant barrier (with reroof) | $1.50-$3.00 per sq ft |
| Radiant barrier plus attic ventilation upgrade | $3.00-$6.00 per sq ft |
| Radiant barrier foil over garage ceiling | $1.50-$2.80 per sq ft |
Does radiant barrier really help in Matthews?
Yes, especially on two-story homes where heat builds in the attic all afternoon. It is not a replacement for insulation, but it lowers attic temperature and lightens the AC load.
Can radiant barrier be installed over existing insulation in Matthews?
It goes on the roofline, not on the insulation itself, so existing attic insulation stays in place. We’ll tell you if your roof geometry makes it worthwhile. Call (866) 751-4428 to ask.
Insulation Removal & Replacement in Matthews
Insulation removal in Matthews usually follows one of three events: rodents or raccoons, a roof leak, or years of humidity that turned fiberglass into a damp mat. In a 20-year-old Matthews house, attic insulation can be compacted, dusty, and full of droppings, which means you are not really insulating anything. We remove the old material with a commercial vacuum and start fresh. For the full process, see our Insulation Removal & Replacement page.
Attic Insulation Removal
Signs you need it
You see animal droppings, water stains, or the old insulation is gray, matted, and settled to half its original depth. Time to start over.
What it costs in Matthews
Attic insulation removal in Matthews ranges from $2.50 to $5.50 per square foot, including bagging, vacuuming, and disposal.
How we do it
We run a HEPA-filtered vacuum line from the attic to a truck-mounted unit, removing all old material down to the deck. We then air seal, and you decide what goes back in.
Contaminated Insulation Removal
Signs you need it
You have active mold in the attic, or the insulation shows large rodent latrines and nesting. Contaminated material needs full removal, not a top-up.
What it costs in Matthews
Contaminated insulation removal in Matthews generally adds 15-25% to standard removal pricing due to PPE and disposal requirements.
How we do it
We treat the space with an antimicrobial after vacuuming, then sanitize the deck. We also identify and seal the entry points so the problem does not come back.
What Insulation Removal & Replacement Costs in Matthews
| Item | Typical range in Matthews |
|---|---|
| Standard attic insulation removal | $2.50-$5.50 per sq ft |
| Contaminated insulation removal | $3.00-$6.50 per sq ft |
| Vermiculite removal (with testing) | $6.00-$12.00 per sq ft |
| Blown-in replacement after removal | $1.15-$2.25 per sq ft |
Should I remove old insulation before adding new in Matthews?
Only if the old material is contaminated, water-damaged, or so compressed it’s holding moisture. Otherwise a top-up after air sealing is usually enough. We’ll tell you honestly which applies.
How long does insulation removal take in Matthews?
A typical 1,500-square-foot attic takes one day to remove and one day to re-insulate. Call (866) 751-4428 for a precise timeline after we see the space.
Attic Air Sealing in Matthews
Attic air sealing in Matthews is the highest-ROI step most homeowners skip. Every hole in the attic floor, from can lights to top plates to chases around plumbing, lets conditioned air escape into a 130-degree attic. In Matthews’s humid climate, that stack effect also pulls warm, wet air through the house in summer. Sealing those gaps before insulating is what makes the insulation actually work. Full details live on our Attic Air Sealing page.
Attic Floor Air Sealing
Signs you need it
Your upstairs rooms are staler than the downstairs, or you see dust streaks on ceiling paint where air is leaking through.
What it costs in Matthews
Attic floor air sealing in Matthews typically costs $1.25-$2.75 per square foot, including materials and the time to move existing insulation aside.
How we do it
We pull back or vacuum aside the insulation, seal every penetration with foam or caulk, then relay or top up the insulation. The difference in how the house feels is often immediate.
Can Light & Duct Boot Sealing
Signs you need it
You have recessed can lights in the ceiling below the attic, or you can feel air moving around the supply registers. Both are direct leaks into the attic.
What it costs in Matthews
Can light and duct boot sealing in Matthews runs $50-$120 per fixture or boot, depending on access and the type of can.
How we do it
We use fire-rated covers or foam boxes around IC-rated cans, and we seal duct boots to the drywall with mastic and foam. This closes the two biggest air leaks in most Matthews attics.
What Attic Air Sealing Costs in Matthews
| Item | Typical range in Matthews |
|---|---|
| Attic floor air sealing | $1.25-$2.75 per sq ft |
| Top plate and penetration sealing | $2.00-$4.00 per linear foot |
| Can light and duct boot sealing | $50-$120 per fixture |
| Attic hatch sealing and weatherstripping | $150-$450 total |
Do I need air sealing before adding insulation in Matthews?
Yes. Insulation slows heat transfer but does not stop air movement. Sealing is what prevents your conditioned air from leaking into the attic in the first place.
Can you air seal without removing all my attic insulation?
Usually, yes. We move the insulation aside in sections, seal, and put it back. If the old material is too far gone, removal might be the smarter move. Call (866) 751-4428 and we’ll check for you.
Wall Insulation in Matthews
Wall insulation in Matthews is a retrofit problem. Homes built in the 1990s and 2000s typically have R-13 fiberglass batts in the walls, which is not much, and any gap or settling leaves uninsulated pockets. The fix for finished walls is injection foam or drill-and-fill dense-pack, both done from the exterior or interior without tearing out drywall. It is a slower job than an attic, but the comfort difference in rooms that border unconditioned space is real. See the full approach on our Wall Insulation page.
Injection Foam Wall Insulation
Signs you need it
Rooms against an exterior wall are cold in winter and hot in summer, or you can feel the wall radiating heat on a July afternoon in Matthews.
What it costs in Matthews
Injection foam wall insulation in Matthews runs $2.75-$5.00 per square foot for a typical retrofit, with exterior work usually on the lower end.
How we do it
We drill small holes through the siding or drywall, inject slow-rise foam behind the sheathing, and patch the holes. The foam fills gaps that old batts never touched.
Drill & Fill Wall Insulation
Signs you need it
You have little to no insulation in your walls, which is common in some Matthews homes built before the 1990s energy code updates.
What it costs in Matthews
Drill-and-fill wall insulation in Matthews runs $2.00-$4.00 per square foot, with dense-pack cellulose or fiberglass filling the stud bays.
How we do it
We drill access holes, fill each bay with dense-packed material under pressure, then patch and repaint. The result is a wall that finally holds temperature.
What Wall Insulation Costs in Matthews
| Item | Typical range in Matthews |
|---|---|
| Injection foam wall retrofit | $2.75-$5.00 per sq ft |
| Drill-and-fill dense-pack wall | $2.00-$4.00 per sq ft |
| Interior wall soundproofing | $1.75-$3.50 per sq ft |
| Exterior wall insulation (new construction) | $1.50-$3.00 per sq ft |
Can you insulate the walls in my finished Matthews home?
Yes, without gutting the house. Injection foam and drill-and-fill methods are designed for finished walls and can be done from the exterior in most cases.
How do I know if my Matthews walls are insulated?
We can check with a thermal camera during a home energy audit, or during an inspection. Call (866) 751-4428 and we’ll schedule a time to look.
Attic Cleaning & Rodent Proofing in Matthews
Attic cleaning and rodent proofing in Matthews is a two-part job: remove what the animals left behind, then make sure they can’t get back in. Rats, mice, squirrels, and raccoons all find their way into attics through roofline gaps, soffit vents, and loose trim. In Matthews’s subdivisions, where mature trees overhang roofs, we see squirrel activity more than most people expect. After cleaning, we sanitize and seal. For the full process, see our Attic Cleaning & Rodent Proofing page.
Attic Cleanout
Signs you need it
You hear scratching at dusk or dawn, see droppings near the hatch, or find chewed insulation. Time to remove the contaminated material and start fresh.
What it costs in Matthews
Attic cleanout in Matthews runs $1,200-$3,500 depending on attic size, contamination level, and how much material has to be removed.
How we do it
We vacuum out all loose debris and insulation, bag it, and haul it away. Then we wipe down and prep the space for sanitizing.
Rodent Proofing & Exclusion
Signs you need it
You’ve had animals removed and they keep coming back, or you can see daylight through gaps in the roofline. Exclusion is the only permanent fix.
What it costs in Matthews
Rodent proofing and exclusion in Matthews ranges from $500 to $1,800 depending on roof complexity and how many entry points we find.
How we do it
We seal gaps at the roofline, vents, and trim with steel wool, hardware cloth, or foam where appropriate, and we verify soffit vents are properly screened.
What Attic Cleaning & Rodent Proofing Costs in Matthews
| Item | Typical range in Matthews |
|---|---|
| Attic cleanout | $1,200-$3,500 |
| Attic sanitizing and decontamination | $800-$2,200 |
| Rodent proofing and exclusion | $500-$1,800 |
| Full attic restoration | $3,500-$9,000 depending on scope |
Will cleaning my Matthews attic get rid of the smell?
Most of the smell lives in the contaminated insulation and droppings. Once that material is removed and the space is sanitized, the odor clears. Sealing entry points keeps it from returning.
Do you handle the pest removal or just the proofing in Matthews?
We focus on the insulation, cleaning, and exclusion side. If live animals are present, we can recommend a local pest service in Matthews and coordinate timing. Call (866) 751-4428 and we’ll sort it out together.
Home Energy Audit in Matthews
A home energy audit in Matthews tells you exactly where your house is leaking air and losing conditioned heat, before you spend a dollar on insulation. For 1990s and 2000s production homes, the answer is usually the same three places: attic floor, rim joists, and can lights. The audit gives you a blower door number, thermal imaging, and a priority list. For details on what’s included, see our Home Energy Audit page.
Blower Door Test
Signs you need it
Your energy bills spike in July and January, or rooms never hold temperature. A blower door test quantifies the problem instead of guessing.
What it costs in Matthews
A blower door test in Matthews runs $250-$500 as part of an audit, or as an add-on to any insulation job.
How we do it
We mount a calibrated fan in an exterior door, depressurize the house, and measure how hard the house pulls air through every crack. The number tells us how leaky the envelope is.
Thermal Imaging Inspection
Signs you need it
You want to see where the insulation actually is and where it’s missing, without tearing into walls. Thermal imaging makes heat loss visible.
What it costs in Matthews
Thermal imaging inspection in Matthews ranges from $200 to $450, often bundled with a full audit.
How we do it
We use an infrared camera to map wall and ceiling temperatures, which shows missing insulation, moisture, and air leaks as clear color patterns.
What Home Energy Audit Costs in Matthews
| Item | Typical range in Matthews |
|---|---|
| Blower door test | $250-$500 |
| Thermal imaging inspection | $200-$450 |
| Insulation inspection | $150-$350 |
| Duct leakage test | $200-$400 |
Is a home energy audit worth it in Matthews?
Yes, if you’re planning insulation work. It tells you where to spend money first, so you don’t insulate the attic when the real problem is the rim joist.
Do you give a written report after the audit in Matthews?
Yes, with the blower door number, thermal images, and a prioritized list of fixes. You get the data, then you decide. Call (866) 751-4428 to schedule an audit.
Brands We Service in Matthews
We install and service Owens Corning, Johns Manville, and Demilec products in Matthews, with materials available locally or pulled from our metro office. Most common products are on hand and can be scheduled within a few days. See our brands for the full lineup.
Pricing for Insulation in Matthews, NC
| Service | Typical range in Matthews |
|---|---|
| Crawl space vapor barrier | $2.75-$4.50 per sq ft |
| Crawl space encapsulation | $5.50-$12.00 per sq ft |
| Spray foam insulation | $1.20-$4.50 per board foot |
| Blown-in insulation | $1.00-$2.25 per sq ft |
| Radiant barrier installation | $1.50-$3.50 per sq ft |
| Insulation removal | $2.50-$6.50 per sq ft |
| Attic air sealing | $1.25-$2.75 per sq ft |
| Wall insulation retrofit | $2.00-$5.00 per sq ft |
| Attic cleaning & rodent proofing | $500-$3,500 depending on scope |
| Home energy audit | $150-$500 per test |
Prices in Matthews move most on two things: crawl space access and how much contaminated or failed material has to come out first. We quote upfront with no trip charge in the county, and the number we give you is the number you pay, with no surprise add-ons.
Neighborhoods We Serve in Matthews
We work across Matthews, from the older streets near downtown to the subdivisions that line the I-485 corridor. Our normal response time in Matthews is same-day or next-day for emergencies, and within a few days for standard insulation and encapsulation jobs.
- Downtown Matthews and the historic district
- Weddington Road corridor
- Plantation Estates
- Butler and Mint Hill border areas
- Pleasant Plains and Sardis neighborhoods
Service Area - Cities Near Matthews
Walt’s Insulation serves Matthews and the surrounding Mecklenburg and Union County communities. If you’re in Pineville, NC, Charlotte, NC, Harrisburg, NC, or Belmont, NC, we cover those areas too. Call and you’ll get a live person, not a routing system.
Serving Matthews, NC - Our Local Coverage Area
We’re based in the Matthews area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation in Matthews
Same day or next day for crawl space and attic emergencies, and within two to four business days for standard quotes and scheduled work. Call (866) 751-4428 and we’ll give you a real arrival window.
Most insulation and crawl space work does not require a town permit, but some Matthews HOAs want notice before exterior work like drill-and-fill wall insulation. We can help you check what your neighborhood requires.
Do you serve all of Matthews or just certain ZIP codes?
We serve the entire Matthews area, including 28104 and 28105, with no trip charge inside the county. If you’re near the town limits or just outside,
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Matthews Customers Say
"The house had rats in the attic insulation and a smell we could not place. Walt's crew pulled all of it, sealed the gaps where they were getting in, sanitized, and put in new blown-in. He sent photos of the sealed openings so I could see it done."
- Rosa Delgado"Walt came out himself, stuck his head in the attic, and told me I had about four inches where I needed fourteen. No sales pitch, just the number and what it would cost to fix it. Crew was here two days later."
- Carl Meadows"We had the walls of our old house filled with foam through small holes from the outside. Patched and painted the same afternoon. The bedrooms hold heat now and the furnace runs a lot less."
- Linda Baumgartner